Dewasa ini tuntutan pelanggan terhadap produk/jasa yang “bebas defect” semakin meningkat. Untuk memenuhi tuntutan tersebut, banyak konsep manajemen mutu diterapkan dan bahkan beberapa perusahaan ada yang sudah mengklaim bahwa produk/jasanya “bebas defect”.

Namun apakah produk/jasa “bebas defect” mencerminkan prosesnya juga “bebas defect”?  Ternyata di balik label tersebut sering dijumpai bahwa prosesnya dihasilkan melalui proses rework, reprocess, inspeksi, dan proses lain yang tidak memberi nilai tambah.

Melalui pendekatan “menciptakan produk/jasa  ‘bebas defect’  sejak awal proses” yang menjadi landasan dalam konsep Six Sigma Quality, diharapkan mampu memuaskan pelanggan dan stakeholder.

Read the full story

There are many categories of hazards that might be encountered in a laboratory setting, and situations can change frequently. Even after you have identified and controlled all current risks, it is critical that you remain open to the possibility that new unexpected dangers can arise. Periodically verify the hazards are required. All employees who work with hazardous chemicals must be apprised of the hazards of chemicals present in their work area. This training must be provided before initial assignment and before new exposure situations. Personal protective equipment necessary for the safe handling of hazardous substances must also be provided. Employees who work with chemicals in laboratories must be trained on the Laboratory Standard. Additional training is required when new exposure situations arise. Such situations include the use of new chemicals, greater quantities of chemicals, and different procedures.

TRAINING LABORATORY SAFETY Course Content

1. The Occupational Health Introduction.
2. Potential Hazards in Laboratory (ILO – International Hazard Datasheets on Occupation)
3. COSHH (Control of Substances Hazardous to Health)
4. MSDS and Labeling
5. Laboratory Safety Practices.
6. Ventilation.
7. Personal Protective Equipment
8. Laboratory Ergonomics
9. Hazardous Waste and Emergency Procedure
10. Laboratory Safety Management System (Laboratory Safety Plan)
11. Exposure monitoring, Medical Surveillance and Bio Monitoring.

WHO SHOULD ATTEND?

1. Health and Safety Committee members
2. Managers, supervisors and worker
3. Facility managers
4. Human resources managers
5. Senior managers
6. Others with health and safety responsibilitie

DURATION
14 hours effective (2 days)

TRAINER
Abdul Baktiansyah, Dr, MS.
Beliau sangat berpengalaman dalam Kesehatan Kerja (Health) selama hampir 30 tahun. Pendidikan formal beliau didapat dari Fakultas Kedokteran Universitas Airlangga pada tahun 1979, dan Magister of Science dalam Kedokteran Okupasi dari Bagian Ilmu Kesehatan Masyarakat, Fakultas Kedokteran Universitas Indonesia (2004), beliau juga sering mengikuti berbagai training baik itu di dalam maupun di luar negeri yang berkaitan dengan Kesehatan dan Keselamatan Kerja. Perjalanan Karir beliau sebagai praktisi kesehatan kerja dmulai sejak tahun 1982 – 2005, dimana beliau pernah mengemban jabatan sebagai Chief Medical Officer pada PT. Ekspan Kalimantan dan kemudian menjadi Occupational Health   & Industrial Hygiene Coordinator pada PT. Medco Energy E&P. Sekarang ini beliau aktif sebagai trainer & konsultan pada bidang Occupational Health & Industrial Hygiene.

COURSE SCHEDULE

1. Bandung, 20 – 21 Mei 2010
2. Bandung, 29 – 30 September 2010
3. Bandung, 22 – 23 Desember 2010

INVESTMENT
Pendaftaran per peserta                                                             Rp. 3.750.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training                Rp. 3.500.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Fasilitas Training: Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break,Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

REFERENSI
1.  PT Pertamina UP II Dumani
2.  PT.BSP – Pertamina Hulu
3.  PT.Lontar Papyrus Pulp & Paper Industry
4.  PT.Banpu Indominco
5.  PT.Tri Polyta Indonesia TBK
6.  PT.IKPP TBK-Perawang Mills
7.  PT.Indah Kiat Perawang
8.  PT. Sud Chemie Indonesia
9.  PT. Trubaindo Coal Mining
10.Politeknik Negeri Pontianak
11.PT. Indopherin Jaya
12.Sekolah Pelita Harapan
13.PT. Kaltim Parna Industri
14.PT. Pupuk Kujang
15.PT. Equilab International
16.Institut Teknologi Bandung Program Studi Teknik Kimia
17.Institut Teknologi Bandung Program Studi Teknik Fisika
18.PT. PLN (Persero) PUSDIKLAT
19.Fakultas Kedokteran UII
20.Unika ATMAJAYA Jakarta

Download Silabus Disini

cforms contact form by delicious:days

12 Days Intensive Course
NEBOSH International General Certificate in Occupational Safety and Health 6th Batch

NEBOSH Training Overview

This NEBOSH Training has been developed for multinational organisations in all sectors working in accordance with international standards or directives but adapting to local needs. It provides organisations with a global presence seeking to adopt an internationally recognised health and safety training programme for its staff. The NEBOSH Certificate is an internationally recognised qualification and provides an excellent underpinning knowledge of safety & health and a sound basis for evaluating hazards and risks. The syllabus incorporates International, technical and other standards where they exist. In other cases, requirements and practices that represent ‘good practice’ are followed.
Topics covered during the course are broken into sixteen elements;

NEBOSH Training Contents

Health and Safety Foundations
Setting policy for health and safety
Organising for health and safety
Promoting a positive health and safety culture
Risk Assessment
Principles of Control
Movement of people and vehicles Hazards and control
Manual and Mechanical handling hazards and control
Work Equipment hazards and control
Electrical Hazards and control
Fire Hazards
Chemical and biological health hazards and control
Physical and psychological health hazards and control
Construction activities and control
Investigation, recording and reporting of events
Monitoring, review and audit

The NEBOSH International General Certificate follows the same principles as the National General Certificate – achieving high standards of health and safety – regardless of any local legal requirements.

Benefits for Companies
In today’s working environment ‘Safety’ plays a key role in the success of any company. The NEBOSH International General Certificate provides a means to improve the safety awareness of company employees, particularly those involved with operations or directly related to safety. The full time course offered by KB Associates Pte Ltd allows for personnel to be able to dedicate their time to the syllabus and course information and is suited for full time company employees or individuals.

Who Should Attend?
The NEBOSH International General Certificate in Occupational Safety & Health is for personnel with health & safety responsibilities e.g. managers, supervisors, safety officers, non-safety specialists etc & who need a grounding & recognised qualification in occupational safety & health. It is also beneficial for those wanting to further their career in the HSE field or those who wish to enhance their HSE knowledge

NEBOSH Training Assessment and Certification
Candidates are assessed by a 2 part written examination and a practical health & safety assessment of a work place situation. Each exam is 2 hours in duration. Candidates must achieve a minimum pass standard in all the examinations and assessment to be awarded the NEBOSH International General Certificate in Occupational Safety & Health. Certification is issued by NEBOSH UK.

Professional Body Memberships
Holders of the NEBOSH International General Certificate are eligible for membership of the following professional bodies, subject to meeting the necessary post-qualification experience requirements:
Institution of Occupational Safety and Health. – Tech IOSH
International Institute of Risk and Safety Management (IIRSM). – Associate Member

NEBOSH Training Investment : Special Price at US$ 3050/ person (excluding all bank charges)

The Fee Includes:
• Lunch, 2 x Coffee and snacks each day
• 11-Days Tutorials
• 1 Day Examination
• Study Book for the NEBOSH National General Certificate Essential Health & Safety Guide
• KBA Course Workbook
• NEBOSH Practical Asessment and NEBOSH registration & Examination fee

The Fee Excludes:
Hotel accomodation, can be arranged by PT. Phitagoras Global Duta if required

The NEBOSH IGC Course Schedule for 2010 are:

1. February 22 – 27 and March 22 – 27 at Batam, Indonesia
2. February 1 – 13, 2010 at Bandung, Indonesia
3. June 14 – 26, 2010 at Bali, Indonesia
4. October 11 – 23, 2010 at Bali, Indonesia

Please contact us for the details.

We would like to express our thanks and gratitude to all participants of NEBOSH International General Certificate on Occupational Health & Safety Course in previous Batch.

They are :

HESS (Indonesia Pangkah Limited); BP Indonesia; PT. Pelita Anugerah Abadi; CNOOC SES, Ltd; PT. Wintermar; Transocean – India; Santos (Sampang) Pty. Ltd; PT. Amec Berca Indonesia; PT. Inti Karya Persada Teknik, PT. JETEC Indonesia, Chevron Indonesia Company, PT. Rekayasa Industri, PT. Apexindo Pratama Duta, CLP Power Hongkong Ltd, Schlumberger,PT. Offshore Services Indonesia,Cuulong Joint Operating Company Vietnam,ENSCO HOLLAND BV,Norce Offshore,PT Pertamina Drilling Services,Total E&P Borneo B.V, United Christian Hospital Hongkong, Intership Pte.Ltd, BP West Java, BP Tangguh, Trans Ocean, Geokinetics, FQMQ-Zambia, Howden China, Autoridade Nacional do Petróleo (Timor Leste), Samudera Oceaneering, Salamander Energy, PT. Tripatra Engineers and Contractors,PT. Shell Indonesia, CNOOC, PT. Schott Igar Glass, and individual participants from Indonesia, France, UK, South Africa, New Zealand and Malaysia.

Testimonial

“The instructor always encouraged everybody to get involved and always accommodated every question” Agus Udimoto
“Very pleasant and a good environment” Rinaldi Saputra
“I liked the way the trainer delivered the presentation materials which were very professional” Constantino Aponso Pinto
“Very easy to relate to the instructor who is a good communicator. Very thorough preparation for the exams” Tristan Murray
“Clear, structural knowledge approach. The instructor was helpful, patient and attentive to the students needs” Asanti
“I liked the knowledge, the hands on experience and good communication of the instructor. Very pleased” Michael Hinch
“It was a good experience” Lee Andersson
“Very clear and concise. First class hotel. Drilled the info in 24/7. Amazing” Gary Garner

cforms contact form by delicious:days

TUJUAN PROGRAM
Program pendidikan AK3 ini adalah program Depnaker untuk memepersiapkan ahli-ahli K3 di perusahaan yang dapat membantu mengembangkan K3 di perusahaan.

Merupakan bentuk seleksi atau penilaian khusus bagi seseorang atau tenaga teknis tertentu yang pernah mengikuti kursus petugas K3 (safety officer) atau kursus instruktur K3 yang berminat menjadi ahli K3 sebagaimana di maksud dalam UU 1 tahun 1970 dan peraturan pelaksananya dengan waktu penyelenggaraan sekurang-kurangnya 120 jam pelajaran atau selama 11 hari efektif.

SASARAN PROGRAM
Setelah menyelesaikan program ini, peserta diharapkan mampu :
- Menjelaskan tugas, wewenang dan tanggung jawab AK3
- Menjelaskan hak pekerja dalam bidang K3
- Menjelaskan kepada pengusaha bahwa upaya K3 menguntungkan bagi perusahaan
- Menjelaskan tujuan sistem manajemen K3 (SMK3)
- Menjelaskan sistem pelaporan kecelakaan
- Menganalisa kasus kecelakaan, mengetahui faktor penyebabnya dan dapat menyiapkan laporan kecelakaan kepada pihak terkait.
- Mengenal P2K3, tugas, tanggung jawab dan wewenang organisasi ini
- Mengenal pembinaan dan pengawasan K3 di tingkat perusahaan, Nasional dan Internasional
- Mengidentifikasi obyek pengawasan K3
- Mengetahui persyaratan dan pemenuhan terhadap peraturan perundangan di tempat kerja.
- Mengetahui persyaratan keselamatan dan kesehatan kerja di tempat kerja
- Mengetahui proses audit dan ruang lingkupnya untuk mengukur tingkat pencapaian

PERSYARATAN PESERTA
• Berpendidikan sarjana, sarjana muda atau sederajat dengan ketentuan : sarjana dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 2 (dua) tahun, sarjana muda atau sederajat dengan pengalaman kerja sesuai dengan bidang keahliannya sekurang-kurangnya 4 (empat) tahun.

MODUL PELATIHAN

• Kebijakan K3
• UU No.1/1970
• Dasar – dasar K3
• P2K3
• Kelembagaan K3
• K3 Penanggulangan Kebakaran
• Pengawasan K3 Listrik
• K3 Pesawat Uap
• K3 Bejana Tekan
• K3 Mekanik
• K3 Konstruksi Bangunan
• K3 Pengawasan Kesehatan Kerja
• Pengawasan Kesehatan Kerja
• Pengawasan Lingkungan Kerja
• Sistem Manajemen K3 (SMK3)
• Audit SMK3
• Manajemen Resiko
• Analisa Kecelakaan
• Analisa Kecelakaan/Statistik dan Laporan Kecelakaan
• Statistik Laporan KecelakaanStudi Kasus
• Praktek Inspeksi/Kunjungan Lapangan
• Seminar

INSTRUKTUR PELATIHAN
Intruktur yang akan memberikan pelatihan adalah instruktur Senior dari DEPNAKERTRANS dan Instruktur yang berkompeten dan berpengalaman di bidangnya.

SERTIFIKASI
Peserta yang lulus pada pelatihan ini akan diberikan sertifikat dan penunjukan Ahli K3 umum yang di keluarkan oleh DEPNAKERTRANS

JADWAL PELATIHAN
Pelatihan diselenggarakan oleh PT. Phitagoras Global Duta bekerjasama dengan Depnakertrans pada tanggal

• Jakarta, 31 Mei – 11 Juni 2010 (running on schedule dengan 20 orang peserta)
• Jakarta, 26 Juli -  6 Agustus 2010 (running on schedule dengan 31 orang peserta)
• Jakarta, 4 – 15 Oktober 2010 (sampai tgl 24 Agustus 2010, peserta sudah mencapai 20 orang)
• Surabaya, 18 – 29 Oktober 2010
• Jakarta, 1 – 12 November 2010
• Jakarta, 13 – 24 Desember 2010

LOKASI PELATIHAN
Hotel Ambhara (****)
JL. Iskandarsyah Raya No. 1 Kebayoran Baru
Tel : +62 (21) – 270 0800, +62 (21) – 270 0800, Fax : +62 (21) – 722 0582
Website: http://ambhara.co.id

Lokasi Hotel di Google Maps, klik disini

INVESTASI
Pendaftaran per peserta                                   Rp. 8.500.000,- (Jakarta), Rp. 8.250.000 (Surabaya)
Pendaftaran & Pelunasan 2 minggu sebelum training                                Discount Rp. 250.000,-

Investasi termasuk Modul, Training kit, Soft copy materi, Sertifikat, SK Penunjukan Ahli K3 Lstrik, Lencana dari Depnakertrans RI, Rehat, Makan siang dan Souvenir

INFORMASI & REGISTRASI
PT. Phitagoras Global Duta
JDC Building 6th Floor, Jl. Jend. Gatot Subroto Kav.53,Jakarta 10260
Telp : 021- 70904580,Fax : 021 5742385, Email: info@phitagoras.co.id

1. PT. Sumitomo Electrc Wintec Indonesia
2. PT. Putra Perkasa Abadi
3. PT. Nenggala Karya
4. PT. Depriwangga Engineering
5. PT. Kaltim Prima Coal
6. Pearl Energy
7. PT. Patra Trading
8. PT. Epiterma Mas Indonesia
9. PT. Trident Perkasa International
10. PT. Tera Data Indonusa
11. PT. Petrosea Tbk
12. PT. Salim Ivomas Pratama
13. PT. Sarana Inti Pratama
14. PT. Serikat Putra
15. PT. Badak NGL
16. PT. Pertamina EP
17. PT. YKK Zipco
18. PT. Gotrans Engineering
19. PT. Epsindo Jaya Pratama
20. PT. Sari Husada
21. PT. Sekiso Industries Indonesia
22. CV. Barlian Mandiri Adyatama
23. PT. Smelting
24. PT. Indotruck Utama
25. Tripatra Engineers and Constructors
26. PT. Surya Teguh Cemerlang Perkasa
27. PT. Nusa Abadi Indo Global
28. MHE Demag Indonesia
29. PT. Total E&P Indonesia
30. PT. Palmas Project Engineering
31. PT. Sinclair Knight Merz
32. PT. Petrokimia Gresik
33. PT. Agro Harapan Lestari
34. PT. Semen Padang

pemenang undian doorprize blackberry pada training ahli k3 umum

Download Silabus Disini