Training Process Safety Management (PSM)

Training Process Safety Management (PSM)

SHARE

training process safety management - psm course jakarta bandung surabayaTraining Process Safety Management

This training process safety management provides an in-depth study of each PSM element. The training process safety management course introduces each PSM element and the specific guidelines for integrating PSM element requirements into other corporate programs and evaluating program compliance throughout the implementation phase.

Case studies and exercises are used throughout the training process safety management course to illustrate interpretations of the requirements and demonstrate ways to develop an effective PSM program, including several video based case studies

What You Will Learn on this Training Process Safety Management :

  • To interpret the performance-based requirements of the U.S. OSHA PSM and EPA risk management standards, as well as learn about related industry standards
  • The elements of process safety that are missing from typical PSM systems, including Human Factors elements (communication, human system interface, work environment, staffing, and fitness for duty), Facility Siting element, Project Risk Management, Senior Leadership & Accountability. The Risk-Based Process Safety (RBPS) guide (2007) from CCPS/AIChE is reviewed so you can understand how to close critical gaps
  • Multiple options for implementing an effective need-specific program
  • Specific guidelines for developing cost effective written programs tailored for each PSM element, whether for a single facility or a corporation
  • How to avoid costly implementation mistakes
  • Jargon for communicating PSM requirements to others throughout the organization
  • How to develop written programs to meet PSM requirements
  • How to incorporate and integrate the PSM element requirements into other corporate programs (other corporate management systems)
  • Key performance indicators
  • How to evaluate program compliance throughout implementation
  • How to begin implementation at your company
  • Additional training necessary for implementation of specific elements
  • The course uses actual and generic case studies, including several video-based case studies
  • To illustrate interpretations of PSM requirements
  • To demonstrate developing an effective PSM program that can be adapted for your facility

Training Process Safety Management (PSM) Program:

  1. Introduction to PSM and its origins and goals
  2. Overview of PSM standards and regulations world-wide, definitions, compliance interpretations
  3. Elements of Training Process Safety Management:
  • Human error basics
  • Elements missing from most PSM systems, including specific human factor aspects, management commitment & accountability, and project risk management
  • Employee participation
  • Trade secrets
  • Process safety information
  • Operating procedures
  • Hot work permit/safe works
  • Training
  • Contractors
  • Process hazard analysis
  • Management of change
  • Mechanical integrity
  • Pre-startup safety review
  • Emergency planning and respons
  • Incident investigation
  • Compliance auditing
  1. Key Performance Indicators, Leading Indicators, and Tracking

  2. Summary of roles and responsibilitie

  3. Developing PSM programs, implementation planning

WHO SHOULD ATTEND TRAINING PROCESS SAFETY MANAGEMENT ?

This  training process safety management should attend by : 

  1. Managers – Operations, Safety, and Executive
  2. Engineers – Process, Safety, and Mechanical
  3. PSM Implementation Team Members – Anyone involved with implementation, including operators and maintenance personnel
  4. Compliance Auditors
  5. Environmental Management and Technicians

TRAINING PROCESS SAFETY MANAGEMENT DURATION
21 hours effective ( 3 days)

TRAINER TRAINING PROCESS SAFETY MANAGEMENT :

SCHEDULE TRAINING PROCESS SAFETY MANAGEMENT  2016

  1. Bandung, 22 – 24 Maret 2016
  2. Jakarta, 15 – 17 Juni 2016
  3. Jakarta, 10 – 12 Agustus 2016
  4. Jakarta, 5 – 7 Oktober 2016
  5. Bandung, 23 – 25 November 2016
  6. BSD Serpong, 19 – 21 Desember 2016

 

SCHEDULE TRAINING PROCESS SAFETY MANAGEMENT  2017

  1. Jakarta, 18 – 20 Januari 2017
  2. Jakarta, 29 – 31 Maret 2017
  3. Jakarta, 14 – 16 Juni 2017
  4. Jakarta, 9 – 11 Agustus 2017
  5. Jakarta, 1 – 3 November 2017

INVESTMENT TRAINING PROCESS SAFETY MANAGEMENT

  1. Rp. 8.499.000,- Rp. 6.999.000 (NEW PRICE)
  2. Rp. 6.499.000,- (Pendaftaran & pelunasan 1 minggu sebelum training)
  3. Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
  4. Fasilitas Training: Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit, Souvenir, Tempat training yg nyaman di hotel berbintang, Makan Siang, coffee / tea break, Sertifikat, Foto bersama seluruh peserta

LOKASI TRAINING
Untuk melihat lokasi training silahkan klik disini

FAQ ( Frequently Asked Question)
Silahkan klik link ini atau link Frequently Ask Question untuk mengetahui pertanyaan – pertanyaan yang sering dilontarkan seputar Training yang kami selenggarakan.

Phitagoras sudah disertifikasi ISO 9001:2008 oleh BUREAU VERITAS Certification, dengan no sertifikat: 234258

Logo_certification_iso Sertifikasi ISO Phitagoras

Phitagoras sudah disertifikasi OHSAS 18001:2007 oleh SAI GLOBAL Certification, dengan no sertifikat: HSM40409

Sertifikasi SAI Global Sertifikat Ohsas PT. Phitagoras Global Duta

 


Download Silabus

 

Pre Registration Form
  1. (required)
  2. (required)
  3. (valid email required)
  4. (required)
  5. Pendaftaran Resmi Harus Mengisi Form Pendaftaran Training
  6. Please read our privacy policy :
 

SHARE

NO COMMENTS

Leave a Reply